Working With The Setup Utility Menus - IBM Aptiva Handbook

3.
When the following symbol appears at the top
right corner of the screen, press F1:
The Setup Utility Main Menu appears:
<F1> Help <F2> General Help
<Esc> Exit/Save < ↑ >< ↓ > Move
<F5> Load System Settings
<Enter> View Menu
The Main Menu you see on your computer may look
Note: slightly different from the menu shown here, but it will
operate the same way.
Working with the Setup Utility
menus
The Setup Utility Main Menu lists options that identify
system configuration topics. When you select one of
these options, an additional menu appears.
To select and move through Setup Utility options, you
must use the keyboard. To move through menus, press
the down (↓ ↓ ) or up (↑ ↑ ) arrow key on the keyboard until
the option you want is highlighted. To select a
highlighted menu option, press the Enter key.
To move through menus, use the following keys:
Keys Function
↑ ↑ ↓ ↓
Use these arrow keys to highlight an option on the
menu. (Press the Enter key to choose the option.)
← ← → →
Use these arrow keys to make a selection and
change an option's setting. On some menus, you
can use these keys to move from one field to
another.
+ +
Use this key on some menus to increase the
numerical value of a setting.
− −
Use this key (the minus or hyphen key) on some
menus to decrease the numerical value of a
setting.
Using the Setup Utility 33