IBM Aptiva Handbook page 45

Table 1: Rapid Resume features activity
Activity: Feature and explanation:
System power light is Feature: Ring Indicator feature in
blinking, but system is Wake Up on Ring
turned off.
This is a normal activity of the
Ring Indicator feature in Wake Up
on Ring. The blinking light
indicates that Wake Up on Ring
turned on your computer to
receive data, a fax, or a voice
message.
Computer does not Feature: Standby
automatically go into
If AutoPlay is enabled, your
Standby when
computer may not enter Standby
AutoPlay is enabled.
unless you disable hard drive and
(In Windows 95, you CD-ROM drive checking in the
can turn on AutoPlay Setup Utility. For information
for CDs. With about these Setup Utility options,
AutoPlay enabled, see "Rapid Resume advanced
audio CDs start to play options" on page 43.
automatically when
you put them into the
CD-ROM drive.)
Table 1: Rapid Resume features activity
Activity:
Computer won't start
from diskette if Rapid
Resume is enabled.
How Rapid Resume features affect your computer's operation
Feature and explanation:
Feature: Rapid Resume
After you turn on the computer,
press Ctrl + Alt + Delete when
you see the Rapid Resume screen.
There may be a slight delay before
the computer restarts.
Note that using Ctrl + Alt +
Delete will cause the loss of your
saved desktop. If possible, first
start your computer without the
diskette and save any unsaved
information. Then shut down your
computer and restart in MS-DOS
mode. From DOS, insert the
diskette and press Ctrl + Alt +
Delete.
29