Using Other Configuration Utilities - IBM Aptiva Handbook

Using other configuration utilities

You can use the Setup Utility that comes with your
Aptiva computer to view or change configuration
settings for most of your factory installed hardware. If
you install new hardware, however, you might need to
use other configuration utilities.
Windows 95 provides the Device Manager to help you
view or change the system resources used by the
hardware installed in your computer. You typically do
not need to use this utility unless you upgrade your
hardware. See "Starting and using the Windows 95
Device Manager" on page 60 for a description of the
Device Manager and instructions for using it.
When you purchase new hardware to install in your
Aptiva computer, a configuration utility might come with
the new device. See the documentation provided with
the new hardware for instructions on using any included
configuration utility. The instructions might be printed
or online.
52 Chapter 4: Viewing and changing Aptiva configuration