Assa Abloy Sargent Profile G1 Series Installation Instructions Manual page 9

Profile Series v.G1 Cylindrical Lock
6. Securing the Lock to Door
1A. If wood door, feed wires up through
the routed channel as shown.
1B. If metal door, feed wire and connector
through inside of door and out hole on
outside of door. *
2. Attach inside rose assembly and
spacer bushing and secure with
screws shown
7. Remove Outside Lever Only
1. Insert key, rotate 45° clockwise and hold
2. Depress lever retainer with push pin tool (provided).
How to Change Cylinder
(if required)
1. With outside lever in hand- use standard
pliers, pull out cylinder retainer.
2. Remove key and cylinder from lever.
3. Insert new cylinder.*
4. Secure by pressing cylinder retainer
flush with self.*
* NOT SHOWN
A7755A.indd 7
Feed wires and
connector in
routed channel
45º
Cylinder
Retainer
Cylinder
Washers
(only 30- prefix)
800-810-WIRE (9473) • www.sargentlock.com • A7755A
Routed channel for
wood door only
Screws
partially
tightened
Key
Outside
Lever
7
11/9/18 12:05 PM