Combination Methods - Leica DMI Series Instructions Manual

8. Operation

8.4 Combination Methods

(Leica DMI4000 B and DMI6000 B)
Up to two combination methods are possible de-
pending on the features of the individual micro-
scope:
FLUO/PH and FLUO/DIC
• Select the combination method
by pressing the variable button COMBI
Alternatively: press the variable button
CHANGE COMBI
(For details on button assignments, please see
the identifi cation sheet.)
The content of the display changes accord-
ingly.
• Place a specimen on the stage and select a
suitable objective.
• Select the desired fi lter cube using the fi xed
function buttons on the front panel.
• The illumination settings for the fl uorescence
and transmitted light axes can be adjusted
separately.
• Toggle the illumination axes with the TL/IL
function button. The content of the LeicaS-
creen changes accordingly.
FLUO > DIC
The transmitted illumination is activated.
FLUO < DIC
The fl uorescence illumination is activated.
94
.
Note:
The manual analyzer (Fig. 110) must be used for
the FLUO/DIC method as described in Chapter
8.2.5, p. 89.
.