LG MASTER-K 120S Series User Manual page 122

Chapter 7 Usage of Various Functions
6) Error code list
(1) PID8AT
Error Code
H0100 Scan time setting range error
H0200 PV setting range error
H0300 SV setting range error
(2) PID8
Error Code
H0100 Scan time setting range error
H0200 Manual operation range error
H0300 Output limit value error(Min.)
H0400 Output limit value error(Max.)
H0500 High frequency noise removal ratio setting error
H0600 Mode command set error
H0700 PWM period setting error
H0800 P gain setting error
H0900 I time setting error
H0A00 D time setting error
H0B00 Bias setting error
PV setting range error
H0C00
H0D00 SV setting range error
H0E00 SV Ramp setting error
H0F00 Delta MV setting error
H1000 PID algorithm setting error
H1100 Operation mode setting error
Description
Description
7-38
Corrective action
Set scan time to available setting range
Set PV setting to available setting range
Set SV to available setting range SV
If PRC identification method is selected, check current PV is
less than SV.(SV should be greater than PV)
Corrective action
Set scan time to available setting range
Setmanual opration value to available setting range
Set minimum output limit value to available setting range and
Set it less than maximum output limit value
Set maximum output limit value to available setting range and
Set it greater than minimum output limit value
Set this parameter to available setting range
Available mode command set are P, PI, PID(PWM for each),
On-Off only.
Set PWM period to available setting range
Set P gain period to available setting range
Set I time period to available setting range
Set D time period to available setting range
Set Bias to available setting range
Set PV to available setting range
Set SV to available setting range
Set SV Ramp to available setting range
Set Delta MV to available setting range
Check PID algorithm setting
Available operation mode is 0 or 1