Network - Strong SRT 8541FTA User Manual

WARNING:
NOTE:
* STRONG cannot guarantee the playback of files although extensions are listed, as it depends on codec, data bit rate and
resolution used (all MPEG codec formats are supported).

7.5 Network

The Network menu consists of the following submenus: RSS, Weather and IP Settings. Connect first the
CAT5E (or better) cable into RJ-45 ETHERNET port of your receiver and the other end into your router.
Before you can use the Internet functions you need to check the setup of the Internet connection in
the IP Settings menu. Use pq to highlight the menu of choice and press OK to enter. Press  to quit.
7.5.1 IP Settings
This menu allows you to setup or check the Internet connection. The default selection is DHCP set to
On. Normally the setup is done automatically by this. To test if the Internet connection works, select
the item SET and press OK. If successful, a pop-up message box will show up and you can start using
it. If not successful, then check your cable or router. Alternatively set DHCP to Off. Then manually
enter your IP, Gateway and DNS values by using the 0 ~ 9 buttons. Select after entering these values
the item SET and press OK to store and to check.
7.5.2 RSS Feed (Really Simple Syndication)
This menu allows you to choose an RSS news link to read the latest news from different sources.
Use pq to highlight a link of your choice and press OK to enter. Select an item you want to read.
Press  to quit. Also you have option to delete, add or edit an RSS feed of your own choice. Press the
GREEN button Add RSS Feed to open the keyboard. Use pq t u to enter. If you need to use special
symbols press P+/P-. To save the created RSS link, select at the end Save and press OK.
7.5.3 Weather
This menu allows you to watch the weather in your region. Use pq to highlight the menu item
Weather from the Network menu. If you have correct Internet connection then the weather page will
show up with details on screen. Use the YELLOW button City List to open a selection list with main
cities.
Use pq to highlight a major city near you and press OK to select. You can enter a city manually.
Press the GREEN button Change City to open a keyboard. Use pq t u to enter. If you need to use
special symbols, press P+/P-. To save the name, select at the end Save and press OK.
20
Formatting will permanently delete ALL data stored on the connected
device. Please make a backup copy of all data you wish to keep before
entering the Format menu. STRONG cannot be held responsible for loss of
data from USB devices used with this receiver.
It is possible to use USB storage devices already formatted in NTFS.