A.1 Technical Specifications - Festo CP-E08-M12-CL Manual

A. Technical appendix
A.1 Technical specifications
A.1.1 General technical specifications
General technical specifications of the CP I/O modules
Temperature range
Operation
sStorage/transport
Relative humidity
Protection against electric shock as per
EN 60204−1/IEC 204 (protection against
direct and indirect contact)
Electromagnetic compatibility
Interference emitted
Immunity against interference
Vibration and shock
Vibration
Shock
1)
The maximum permitted signal cable length is 30 m.
Tab. A/1: Technical specifications of CP I/O modules (general)
Festo P.BE−CPEA−CL−EN en 0404NH
− 5 ... + 50 °C
− 20 ... + 70 °C
95 %, non−condensing
By connection to a PELV power unit
(Protected Extra Low Voltage)
Tested as per EN 61000−6−4 (industry)
Tested as per EN 61000−6−2 (industry)
Tested as per DIN/IEC 68/EN 60068 part 2−6;
0,35 mm path at 10...60 Hz;
5 g acceleration at 60...150 Hz
Tested as per DIN/IEC 68/EN 60068 parts 2−27;
± 30 g at 11 ms duration; 5 shocks per direction
1)
1)
A−3