A.1.2 Technical Specifications Of The Input Modules - Festo CP-E08-M12-CL Manual

A. Technical appendix

A.1.2 Technical specifications of the input modules

Special technical specifications
General technical specifications
Protection class as per EN 60529; plug
connector inserted or fitted with protective cap
Digital inputs
Design
Logic level
1−signal
0−signal
Current consumption (at 24 V)
(input current from sensor to input)
Response delay (at 24 V)
Sensor voltage supply
Rated value
Tolerance
Internal current consumption of the
electronics via the CP connection
(all inputs 0−status)
Load capacity
Electrical isolation
Tab. A/2: Technical specifications type CP−E08−M12−CL and type CP−E08−M8−CL
A−4
Type CP−E08−M12−CL, type CP−E08−M8−CL
See section A.1.1
IP65/IP67
8 inputs as per IEC 1131−2 type 2,
24 V DC, positive−switching (PNP)
> 11 V
< 5 V
At logical 1"
typ. 8 mA
Typ. 3 ms
Via the CP connection
24 V DC
See manual for CP master
< 35 mA
Sum > 0.8 A (electronic short−circuit protection)
None
Festo P.BE−CPEA−CL−EN en 0404NH