A.5.4 Connector Sets For Input Module Type Cp−E16−Kl−Cl - Festo CP-E08-M12-CL Manual

A. Technical appendix
A.5.4 Connector sets for input module type CP−E16−KL−CL
Sockets type PS1−SAC31−30POL+LED Number
Tension spring sockets,
3−row + LED
Festo P.BE−CPEA−CL−EN en 0404NH
Recommendation: Use the connector sockets type
PS1−SAC31−30POL+LED for input module type CP−E16−KL−CL.
2
Two rows of the three−row connector socket are intended as
distributor boards for the sensor supply. These rows are each
connected internally (see Fig. A/7).
Fasten the sockets with the screws provided.
·
The maximum tightening torque is 0.2 Nm.
Connection Recommended
cross section for connection
See leaflet with X1, X2
product
A−19