Siemens SIPLUS HCS Series Operating Instructions Manual page 48

Installing/mounting
5.2 Installing the Power Output Module (POM)
Proceed as follows for each of the four fastening blocks:
Steps
1
2
3
46
Use the screwdriver to push out the fas-
①
tening block .
Position the mounting block according to
the rail thickness at 5 mm or 10 mm.
Push the mounting block inwards until it
clicks into place.
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005