Power Output Module (Pom); Led Operating Display For Pom; Fault Reporting Through Diagnostics Data - Siemens SIPLUS HCS Series Operating Instructions Manual

Process and system messages, error handling

11.2 Power Output Module (POM)

11.2 Power Output Module (POM)
11.2.1

LED operating display for POM

The device has 3 LEDs on the front: The LEDs provide information about the operating
mode of the device/system.
Meaning of LEDs
READY
green
Channel
error
11.2.2

Fault reporting through diagnostics data

The device-internal monitoring functions recognize specific faults in the power output
module. The corresponding information is provided in the diagnostics data.
146
HEATING ERROR
ON red
yellow
Meaning
red
LED x off: Channel x is OK
•
LED x on: Channel x error
•
Meaning
Power OFF, device switched off
Initialization:
The LED flashes until the device has been detected and ad-
dressed by the CIM.
Device is ready
Heating "ON"
A general fault has occurred, e.g. communication, line voltage,
temperature
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005