Mounting The Pom (Busbar Adapter) - Siemens SIPLUS HCS Series Operating Instructions Manual

5.2.1.3

Mounting the POM (busbar adapter)

The mounting of the POM on the busbar is carried out without the need for tools via the
POM busbar adapter.
Installing the POM
Figure 5-1
Steps
1
2
3
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
Installing the POM
Press the button on the top of the busbar adapter
The holder must protrude beyond the busbar adapter as shown in the figure.
Place the busbar adapter on the busbar from above
Press on the busbar adapter from above until the busbar adapter engages
5.2 Installing the Power Output Module (POM)
①
.
②
.
Installing/mounting
③
.
47