Display Features; Setting Menu - norbar EvoTorque EBT Series Operator's Manual

Display Features

If locked padlock appears, enter PIN code.
Any default value is shown as the first option.

Setting Menu

Settings Menu
(i) MODE Torque only:
Setting Icon
Targets
Settings
Information
16
Button Action
Exit /
Setting menu
Select menu & increase / decrease value
TIP: Keep button pressed for fast value change
&
Accept /
Direction
Save / no save
Detail
If the setting menu has 3 icons the
MODE is set to "Torque only".
This is the default setting menu.
If the setting menu has 6 icons the
MODE is set to "Advanced".
Auto Reset
Time & Date (hh:mm:ss
Operation Direction ("+"= clockwise target + anti-clockwise target, ""
or "" sets full torque in opposite direction for undoing fasteners)
Sleep Time 20 sec (Off to 10 - 300 sec)
Tool capacity, Time & date. Tool serial #, Tool name. Software version
[D=Display, M=Motor & B=Bluetooth]. Error Log. Tool Statistics. Tool usage.
Follow "(i) MODE Torque only"
MODE Torque only
Select Target # (T01 – T20).
Set target torque.
Unit (N·m, lbf·ft, ft·lb or kgf·m)
(✘ = Manual Reset /
dd – mm – yy)
Mode (Torque only / Advanced)
Action
Follow "(ii) MODE Advanced"
✓ = Auto Reset).