Maintenance; Daily Checks; Calibration - norbar EvoTorque EBT Series Operator's Manual

Battery tool
Table of Contents

Advertisement

MAINTENANCE

For optimum performance and safety, regular tool maintenance is required. The user maintenance is limited
to that stipulated in this section. Any other maintenance or repairs should be carried out by Norbar or a
Norbar distributor.
WARNING:
Maintenance intervals will depend on the tool usage and the environment in which it is being used. The
maximum recommended maintenance and recalibration interval is 12 months.
TIP:
Steps the user can take to reduce the amount of maintenance required include:
1. Use the tool in a clean environment
2. Maintain the correct torque reaction
3. Carry out daily checks
The tool has no user serviceable parts inside.
WARNING:

Daily Checks

It is recommended to check the overall condition of the tool, battery & charger every day.
Check for damaged parts and repair before use.
Free run tool to ensure motor and gearbox are smooth and quiet.
Run tool to ensure controls are operational.
Check charger power cord for damage – replace if faulty.
Ensure charger PAT test is within date.
Maintain tools. Keep tools dry, clean and free of oil and grease - DO NOT use abrasives or solvent based
cleaners.
Ensure ventilation slots are clean and dust free. If cleaned with compressed air wear eye protection.

Calibration

The tool was supplied with a certificate of calibration. To maintain the specified accuracy, it is recommended
that the tool is recalibrated at least once per year.
Recalibration should be carried out by a distributor with the facilities and traceability to perform a calibration.
Do not remove tool casing; there are no calibration settings inside.
THE TOOL FEATURES A LITHIUM BATTERY.
ALL LITHIUM BATTERIES ARE SUBJECT TO TRANSPORT LIMITATIONS
WITH STRICT PACKAGING AND LABELLING CONDITIONS.
TOOLS MAY BE EASIER TO RETURN WITHOUT THE LITHIUM BATTERY.
ASK NORBAR OR A NORBAR DISTRIBUTOR BEFORE RETURNING TOOL.
REMOVE THE BATTERY PACK FROM THE TOOL BEFORE
INVESTIGATING ANY FAULT. SHORT-CIRCUITING THE BATTERY PACK
CAN CAUSE FIRE OR PERSONAL INJURY.
21

Advertisement

Table of Contents
loading

Table of Contents