Aircraft; Inserting The Aircraft Battery - XDynamics EVOLVE User Manual

AIRCRAFT

INSERTING THE AIRCRAFT BATTERY

Be sure that the aircraft battery is fully charged ( Refer to Charging the aircraft Battery Section )
The aircraft battery contains a contact lubricant suitable for electronic connectors.The grease is white in
appearance and can be seen on the aircraft power connector and aircraft battery. The lubricant is designed
to last for full lifetime of the aircraft and improve electrical performance. The white appearance is normal.
The user MUST not attempt to replace the grease with any other products. No attempts should be made to
remove the lubricant.
See diagram for battery installation intructions
Steps for aircraft battery installation:
1. First ensure the battery is turned OFF .
2. Then ensure the orientation of the battery is correct, the OLED display should be pointing upwards.
3. Insert by pushing the battery gently into the aircraft until the two latches of the battery engage into the aircraft.
Evolve User Manual V1.0 by XDynamics Limited 13