Complete The Bwx 8305 Installation - Cisco BWX 8305 Installation And Commissioning Manual

Complete the BWX 8305 Installation

6.6 Complete the BWX 8305 Installation
6.6.1 Test the Backhaul Connection
If required in the Responsibility Assignment Matrix (RAM) or project plan, test the backhaul to the
customer demarcation point.
6.7 Install Access Services Network Gateway (ASN-GW) &
Broadband Wireless Gateway (BWG) Software
The BWX 8305 Basestation interfaces either a 7300 Series or 7600 Series Access Services Network
Gateway (ASN-GW) router (refer to
WiMAX software application called Broadband Wireless Gateway (BWG). It is beyond hte scope of this
document to provide router installation procedures. For information on installing the Cisco BWG, refer
to the ASN-GW documentation at the following links:
www.cisco.com > Documentation > Routers > Cisco 7300 Series Routers or Cisco 7600 Series Routers
or
http://www.cisco.com/en/US/products/hw/routers/ps352/tsd_products_support_series_home.html
or
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
or BWG Data Sheet:
http://wwwin.cisco.com/sptg/mscbu/mwg/prods/cmx/pg/bwg/files/BWG-R11-DS.pdf
In section 7.2 are the configuration settings to make the BS and BWG communicate.
Figure 6-35
BWX 2305 Basestation Installation and Commissioning Guide
6-38
Figure
7300 Series & 7600 ASN-GW Routers
7301 7301
6-35). The router must be installed, and then loaded with the
7600
Chapter 6 Installation
OL-16336-02