Cisco BWX 8305 Installation And Commissioning Manual page 9

About This Document
Purpose
This document provides a Cisco qualified BWX Mobile WiMAX
Technician or Field Engineer with instructions to properly install a BWX 8305 Basestation (BS). The
scope includes the BS, BWX Basestation Antenna, connection points for the BXW 8303 Basestation
Timing System, power and grounding, the backhaul network, the Access Services Network-Gateway
(ASN-GW) & Broadband Wireless Gateway (BWG), and all cabling. It also includes acceptance testing
procedures.
For safety and compliance reasons, the installation and configuration described in this document
Warning
should be attempted only by persons who have completed appropriate training and achieved proper
technical certifications regarding the use and support of the applicable products. Incorrect
installation, configuration and/or service may lead to damage to the product(s) and/or risk of personal
injury, and may void your product warranty and/or entitlement to support services. You, the customer,
are responsible for obtaining and maintaining any required regulatory licenses, following
appropriate safety procedures, and providing adequately trained staff to perform any installation,
configuration and service of the products described herein.
Revision History
Date Revision/Version
070131 C/1.0/pv1.1
070730 D/1.0
070930 E/1.0
080201 F/1.0
080324 -/01
OL-16336-02
Contributors
GSS, PLM, Engineering,
PM
Same as above
Same as above
Same as above
Same as above
TM
Editor Comments
B. Boles Release 4.5.2-5.2.0
B. Boles, S. Commercial Release 6.0
Redfoot
B. Boles, S. GA Release 6.1
Redfoot
B. Boles, Commercial Release 6.2.7
M. Cox Commercial Release 6.2.7. Changed the
book's title and part number. Also
changed Navini terminology to Cisco
terminology.
BWX 8305 Basestation Installation and Commissioning Guide
Installation & Commissioning
ix