Cisco BWX 8305 Installation And Commissioning Manual page 46

BWX 8305 Basestation Antenna Installation
6.3.4.2 Vertical Separation – Cisco to Cisco
A minimum of 3 ft separation in the vertical axis is required between any two Cisco antennas
(Figure
Figure 6-10
6.3.4.3 Horizontal Separation – Cisco to Another Vendor
A minimum of 10 ft horizontal separation is required between a Cisco antenna and another vendor's
antenna
Figure 6-11
BWX 2305 Basestation Installation and Commissioning Guide
6-10
6-10). This separation is needed to obtain proper and optimum results from each antenna.
Vertical Separation (Cisco to Cisco)
(Figure 6-11).
Horizontal Separation (Cisco to Another Vendor's Antenna)
Chapter 6 Installation
OL-16336-02