Chapter 6 Installation - Cisco BWX 8305 Installation And Commissioning Manual

WiMAX I&C Closeout Tool
Figure 6-1
6.2 WiMAX I&C Closeout Tool
Reference:
•
•
The Cisco Closeout Tool is a collection of linked forms with spreadsheet formulas used to capture and
provide important information for each Basestation deployment. The information captured by this tool
is not only used to help verify proper commissioning of the system during acceptance testing of the site,
but it is also used for later troubleshooting if there are problems.
Keep the Closeout Tool open on your computer during the installation and commissioning of the system
(you can minimize). You will mostly be recording data into the green-colored fields in the various
worksheets found in the tool. At this time, select the first worksheet, "Company Info". Fill in the
company name, BS name, and the remaining green fields
Regulatory Label attached to the bottom of the BS unit.
Later, you will use the "Read BTS Export File (.txt)" button to populate the yellow fields with BSn
configuration data that is exported from the EMS into a text file. After you complete all of the green
fields, click on "Save Workbook" to save this file. Remember to save the workbook after you make your
entries.
BWX 2305 Basestation Installation and Commissioning Guide
6-2
Printout Sheet & Compact Disk Attached to BWX 8305 Basestation Antenna
Appendix G, "Closeout Tool Form & Procedure"
WiMAX I&C Closeout Tool & Procedure
or
(Figure 6-2). Fill in the information from the
Chapter 6 Installation
OL-16336-02