Cisco BWX 8305 Installation And Commissioning Manual page 11

Safety
Warning This document provides a Cisco qualified BWX Mobile WiMAX Installation & Commissioning
Technician or Field Engineer with instructions to properly install a BWX 8305 Basestation (BS).
Installations performed by non Cisco qualified specialists will void warranties, and could damage
equipment and/or cause bodily injury.
To optimize safety and expedite installation and service, read this document thoroughly. Follow all
warnings, cautions, and instructions marked on the equipment and included in this document. To aid in
the prevention of injury and damage to property, cautionary symbols have been placed in this document
to alert the reader to known potentially hazardous situations, or hazards to equipment or procedures. The
symbols are placed before the information to which they apply. However, any situation that involves
heavy equipment and electricity can become hazardous, and caution and safety should be practiced at all
times when installing, servicing, or operating the equipment.
Equipment damage or performance impacting.
Caution
Warning Could cause personal injury or otherwise be hazardous to your health
Cisco expressly requires that when using Cisco electronic equipment always follow the basic safety
precautions to reduce the risk of electrical shock, fire, and injury to people or property.
Follow all warnings and instructions that come with the equipment.
1.
Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the
2.
equipment to water could cause severe electrical shock or serious damage to the equipment.
Do not allow any type of liquid to come in contact with the equipment. Unplug the equipment from
3.
the power source before cleaning. Use a damp cloth for cleaning. Do not use any soaps or liquid
cleaners.
Follow all airport and FAA regulations when using the equipment on or near aircraft.
4.
Only operate the equipment from the type of power source(s) indicated in this manual (for
5.
Subscriber Station (SS) equipment: 110/220 VAC, 60/50 Hz; for BS equipment: +24 VDC, - 48
VDC, or 100/240 VAC). Any other type of input power source may cause damage to the equipment.
6. Power the SS equipment using only the AC power cord provided, and in accordance with the
instructions specified in the User Guide.
OL-16336-02
C H A P T E R
BWX 8305 Basestation Installation and Commissioning Guide
1
1-1