Cisco BWX 8305 Installation And Commissioning Manual page 60

BWX 8305 Basestation Antenna Installation
Step 7 Turn off the RF signal. Change the frequency and repeat this process for the High and Low frequencies
(matching the printed sheet that came with the antenna).
Step 8 Power down and remove the Test Box.
6.3.10.10 Record BWX 8305 Basestation Antenna Data in Closeout Tool
After you have swept the BWX 8305 Basestation Antenna TX and RX paths, record the results in the
"RFS and Cable Sweeps Information" worksheet in the Closeout Tool form
Figure 6-23
BWX 2305 Basestation Installation and Commissioning Guide
6-24
RFS TX & RX Path Gain/Loss
Chapter 6 Installation
(Figure 6-23).
OL-16336-02