Cisco BWX 8305 Installation And Commissioning Manual page 64

BWX 8305 Basestation Installation
Figure 6-26
To protect against corrosion, the Installer should apply an anti-corrosive compound to each connection
point
due to climate effects. For the power and grounding cables, also look at
of heat shrink tubes.
Figure 6-27
Figure 6-28 Terminating Grounding Cables
BWX 2305 Basestation Installation and Commissioning Guide
6-28
Apply Anti-oxidant Joint Compound
(Figure 6-27). This is especially necessary for the BWX 8305 Basestation Antenna connections
Terminating Power Cables
Kopr Shield Kopr Shield Apply Anti-corrosive Apply Anti-corrosive
Crimp Crimp Cover with electrical tape Cover with electrical tape
or heat-shrink tube or heat-shrink tube
Figure 6-28
UL Listed Lugs UL Listed Lugs
Apply Anti- Apply Anti-
corrosive corrosive
Chapter 6 Installation
concerning the use
Insert Lugs Insert Lugs
Attach Attach
OL-16336-02