Priming - Taylor 8756 Operator's Manual

Priming

Step 1
Place the mix tank and the cover in the mix cabinet.
Step 2
Insert the prongs of the mix probe inside the mix
tank. Connect the mix probe in the socket
receptacle.
Figure 55
Step 3
Place the free end of the suction line into the mix
tank.
Figure 56
Model 8756
Step 4
Install the funnel. Fill the mix tank with fresh mix.
Step 5
Remove the funnel and install the mix storage cover.
Close the mix cabinet door.
Step 6
Place an empty pail beneath the door spout and
open the draw valve. With the prime plug still in the
UP position, press the PUMP key. This will allow the
mix to be pumped through the freezing cylinder and
force out any remaining sanitizer. When full strength
mix is flowing from the door spout, close the draw
valve.
27
Figure 57
Figure 58
Operating Procedures