Sanitizing - Taylor 8756 Operator's Manual

Step 14
Lubricate both sides of the pressure switch
diaphragm.
Figure 41
Step 15
Place diaphragm into groove in pressure switch cap.
Figure 42
Step 16
Screw the cap securely onto the housing.
Figure 43
Repeat these steps for other side of freezer.
Operating Procedures

Sanitizing

Step 1
Prepare a pail of approved 100 PPM sanitizing solu­
tion (examples: 2-1/2 gal. [9.5 liters] of Kay-5R or
2 gal. [7.6 liters] of Stera-SheenR). USE WARM
WATER AND FOLLOW THE MANUFACTURER'S
SPECIFICATIONS.
Step 2
Place the pail of sanitizing solution inside the mix
cabinet.
Step 3
Brush clean the mix inlet tube with the long brush
and the sanitizing solution.
Step 4
Connect the free end of the flare line to the threaded
fitting on the mix inlet tube.
24
Figure 44
Figure 45
Model 8756