Setting / Adjustment; Charging The Rechargeable Battery; Fitting The Rechargeable Battery; Removing The Rechargeable Battery - Mafell KSS 60 36B Original Operating Instructions

Cross-cutting system
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
- Always use the riving knife/splitter except for
"plunge cuts".
- For the riving knife/splitter to function, it has to be
located in the saw slit.
- Never operate the saw with bent riving
knife/splitter.
- Examine the workpiece for foreign objects. Never
attempt to cut into nails or other metal objects.
- Please ensure for your company that this machine
is
exclusively
operated
rechargeable battery packs with 2.6 Ah.
- None of the 4.0 Ah rechargeable battery packs
(order No. 094427 "Rechargeable battery Power
Tank 36 B 144") or other rechargeable battery
packs with 4.0 Ah or higher available on the
market from other manufacturers may be inserted
in this machine.
Instructions on service and maintenance:
- Regularly cleaning the machine, especially the
adjusting devices and guides, constitutes an
important safety factor.
- Only original MAFELL spare parts and accessories
may be used. Otherwise the manufacturer will not
accept any warranty claims and cannot be held
liable.
4

Setting / Adjustment

4.1 Charging the rechargeable battery

Check whether the rated voltage of the rechargeable
battery agrees with the information specified on the
machine.
Rechargeable battery and charger are matched to
each other. Only use the MAFELL – APS 36
rechargeable power station for charging.
Before using a new machine, first of all charge the
rechargeable battery.
A description of the initial operation of the APS 36
and a description of the charging operation can be
found
in
the
enclosed
rechargeable power station".
The rechargeable battery is equipped with a
temperature monitoring system. This guarantees that
the rechargeable battery is only charged in the
temperature range between 0°C and 45°C. This
achieves a long service life for the rechargeable
battery.
with
these
36V
instructions
"APS 36
-22-
A considerably shortened operating time per charging
procedure indicates that the rechargeable battery is
spent and needs to be replaced.
Danger
Explosion hazard
Protect the rechargeable battery
against heat, fire and moisture.
Do not place the rechargeable battery onto heating
appliances and do not expose the rechargeable
battery to strong solar radiation for a longer period of
time. Temperature sabove 50°C are detrimental to
the
rechargeable
rechargeable battery to cool down before charging it.
Do not open the rechargeable
battery and protect it against
impacts. Keep the rechargeable
battery in a dry and frost-proof
place.
Danger
Cover the rechargeable battery's
contacts if it is stored outside the
charger. There is a fire and
explosion hazard in case of a short
circuit caused by metallic
jumpering.
Follow the instructions for the
protection of the environment.

4.2 Fitting the rechargeable battery

Slide the charged rechargeable battery into the
battery guide below the handle until it perceptibly
engages and the lettering "STOP" can no longer be
seen.
Before using the machine,
convince yourself that the
rechargeable battery is firmly
seated in the machine.

4.3 Removing the rechargeable battery

Unlock the rechargeable battery by pressing the
locking lever 2 (Fig. 2) and pull it out of the battery
guide.
battery.
Allow
a
heated

Advertisement

Table of Contents
loading

Table of Contents