Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell KSS 60 36B Original Operating Instructions

2.3 Technical data

Nominal voltage
Saw blade speed while idling
Saw blade speed at normal load
Cutting depth 0 /30 /45
Tilting saw unit
Saw blade diameter max/min
Saw blade body thickness
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight with rechargeable battery and guide rail
(without parallel stop)
Dimensions (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Idling
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Cross-cutting system KSS 60 36B complete with:
1 carbide-tipped circular saw blade Ø 185 mm (6 1/4 in.), 32 teeth
1 riving knife / splitter (thickness 1.5 mm/1/16 in.)
1 service tool in bracket on the machine
1 carrying case
1 operating manual
1 folder "Safety Instructions"
1 parallel stop
1 charger APS 36
2 batteries 36V / 2.6 Ah
Sound power level
102 dB (A)
99 dB (A)
.
2
-19-
36 V
3300 rpm
2600 rpm
66 / 62 / 53 mm
0º – 45º
185 /172 mm
1.4 mm (6 1/4 in./5 3/4 in.)
2.4 mm (6 1/4 in./5 3/4 in.)
20 mm
35 mm (1 3/8 in.)
6.6 kg (6.2 lbs)
257x769x277 mm
Workplace-related emission value
91 dB (A)
88 dB (A)