Signs And Symbols; Product Information; Manufacturer's Data; Machine Identification - Mafell KSS 60 36B Original Operating Instructions

Cross-cutting system
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
1

Signs and symbols

2

Product information

in respect of machines with item number 919501

2.1 Manufacturer's data

MAFELL AG, Postfach 1180, D-78720 Oberndorf / Neckar, Phone +49 (0)7423/812-0, Fax +49 (0)7423/812-
218

2.2 Machine identification

All details required for machine identification are available on the attached rating plate.
This symbol appears at places where you will find instructions for your
own safety.
Non-compliance with these instructions may result in very serious injuries.
This symbol indicates a potentially hazardous situation.
If this situation is not avoided, the product or objects in its vicinity may get
damaged.
This symbol indicates tips for the user and other useful information.
CE symbol to document compliance with the basic safety and health
requirements according to Appendix I of the Machinery Directive.
For EU countries only
Do not dispose of electrical tools together with domestic waste!
In accordance with the European directive 2002/96/EC on waste electrical and
electronic equipment and transposition into national law, obsolete electrical
tools must be collected separately and recycled in an environmentally-
compatible manner.
To reduce the risk of injury, please read the operating instructions.
Max. permissible temperature 50°C
Protect the rechargeable battery from heat, excessive solar radiation, fire, frost,
water and humidity.
There is danger of explosion!
-18-

Advertisement

Table of Contents
loading

Table of Contents