Table of Contents
Advertisement
Manual Datafox ZK-MasterIV
3.9 Status message of the access control
For the admission control following state messages are defined. The decimal values of the state message
can be saved to every data record.
Display
0
3
4
5
6
7
8
9
10
11
Table 17: Initialization / Communication
Display
20
21
22
23
24
25
26
27
28
29
30
31
32
34
35
100
101
102
103
Table 18: Access control
Version: 04.01.07.00
Assigned status message
Module recognised, everything is okay
Module not defined in the list but found in the bus
Module from the list not found in the bus
Module wrong coding password
Module wrong login password
Module wrong reader type (Mifare, Legic, Unique, etc.)
Module error while configuring the module
Module neither found in the list nor in the bus (is not used)
The communication key for the PHG-Crypt-protocol has been changed
The communication key for the PHG-Crypt-protocol has not been
changed
Assigned status message
Access granted for this card number
Card number not contained in the identification list
Card number blocked
Time of validity of card number expired
Room not contained in the location list
No access during this time
Awaiting PIN entry (green LED flashes)
Entered PIN is invalid
PIN with menace code was entered
Entered PIN is OK
Entered master PIN is OK
Time-out for PIN entry
Card number with general authorization
Card number in the online mode read
PIN in the online mode read
Access control deactivated in the setup
At the moment the access control cannot be called up (busy)
Access control needs the lists
Incorrect bus type (Datafox, PHG, etc.)
Page 91
www.datafox.de
Advertisement
Table of Contents
