Datafox ZK-MasterIV Manual page 118

Manual Datafox ZK-MasterIV
Figure 99: Settings of the RS485 communication via converter
Figure 100: Settings of the TCP/IP communication
Version: 04.01.07.00
For a communication via a RS485 converter, in
addition to the information of the RS232 commu-
nication you have to set if one or several devices
should be activated. For a communication with
only one device the bus number of the device is set
(see system menu bios in chapter 4.5.12). Several
devices can only be activated in a consecutive
order of bus numbers, starting with bus number 1,
and by giving the bus number of the last device.
At a communication via TCO/IO the IP address
of the ZK-MasterIV, the communication port and
the timeout (in msec) have to be set.
Page 118
www.datafox.de