Datafox ZK-MasterIV Manual page 159

Manual Datafox ZK-MasterIV
Figure 151: Transmitting the setup to the device
Figure 152: Transmitting the access control lists to the device
Version: 04.01.07.00
Now you can transmit the setup to the device via
Kommunikation
progress bar indicates, that data are transmitted
to the device.
transmission is indicated by a message you have
to confirm via OK.
At last you can transmit the access control lists to
the device via
Kommunikation
Zutrittskontrolllisten laden
can set there, which lists shall be transmitted. The
progress bar indicates, that data are transmitted to
the device. A successful conclusion of the transmis-
sion is indicated by a message you have to confirm
via OK. For ca. 10s both the red and the yellow
LED are flashing. This indicates, that the access
control lists on the terminal were updated.
Page 159
Setup schreiben
¢ ¡
A successful conclusion of the
¢ ¡
. In addition you
¡
www.datafox.de
. The
¡