Datafox ZK-MasterIV Manual page 85

Manual Datafox ZK-MasterIV
The Location.txt (Location table) has the following content:
; Location list for the example access control system
; ID RefGroup RefTime RefTimeNoPin
1 1 3 3
1 2 3 3
2 1 1 0
The first data record sets that the person group 1 gets access to room 1 for the time model 3 without
needing to enter the additional PIN within the time model 3, because in this example the TS TMR33-L
and the TS TMR33-TM has no keyboard. The second data record defines the same for the person group
2. The third data record sets, that only the person group 1 gets access to room 2 within the time model
1 and additionally has to enter the PIN defined in the Identification.
The Time.txt (Time table) has the following content:
; Time list for the example access control system
; ID Weekdays TimeStart TimeEnd
1 12345 07:00 13:00
2 12345 13:01 18:59
3 12345 07:00 18:59
In the time table the different time models are defined.
The Action.txt (Time table) has the following content:
; Action list for the example access control system
; ID RefRead PortOut Elapse RefTime
1 1 1 25 0
1 2 2 25 0
2 3 1 25 0
2 3 2 25 0
The first data record sets that the first internal relay (PortOut = 1) of the ZK-MasterIV (RefRead 1 =
reference to the first data record of the reader table) is switched for the duration of 5 seconds. If you set
Elapse on = you have to give a time model in which you define how long the relay should be switched.
Otherwise, the switched relay permanently stays in this state. The second data record sets that the
open-collector (PortOut = 2) is switched on the TS TMR33-LTM (reference to the second data record of
the reader table) for the duration of 5 seconds. You can now deduce data record 4 and 5.
The tables Holiday and Event are not necessary for this example. With regard to the configuration of the
holiday table it has to be mentioned that at first you set a holiday in the format YYY-MM-DD. Next, you
set the group for which this arrangement should be valid. If several groups are concerned, simply display
the data record with the same date several times and change the group ID. In the third column of each data
record you can additionally set a time model. By this way you can define half-holidays like Christmas Eve.
The data record 2006-12-24 1 1 in the holiday table with the time model 1 12345 07:00 13:00 means that
on 24 Dec 2006 the person group 1 only gets access from 7 am to 1 pm (13:00).
With regard to the event table, the following things have to be mentioned: at first, you have to set the
Page 85
Version: 04.01.07.00 www.datafox.de