Datafox ZK-MasterIV Manual page 32

Manual Datafox ZK-MasterIV
within the first 8 digits, a termination of the communication may occur. No lists are transmitted to the
terminal then.
If you want to transmit data and lists terminal oriented, you have to log an additional data structure in
the following steps. The selection is based on the serial number of the terminal.
Figure 25: Configuration of an USB stick
Version: 04.01.07.00
6. Select the drive, that was allocated to the USB
stick.
7. Create the directory structure for a terminal
with the proper serial number.
Create a password, that is only valid for
8.
the terminal with the logged serial number (e.g.
1212). The correct password is the basis of a
data transfer with this terminal. That way you
avoid, that any USB stick with the created data
structure can read the data out of the device.
9. Log the password, that shall be logged for this
terminal only, e.g. 4455.
10. Set the password to the USB stick.
Page 32
www.datafox.de