Datafox EVO 3.5 Pure Manual
  1. Manuals
  2. Brands
  3. Datafox Manuals
  4. Touch terminals
  5. EVO 3.5 Pure
  6. Manual

Datafox EVO 3.5 Pure Manual

Flexible data collection with method
Hide thumbs
Table of Contents

Advertisement

Quick Links

Handbuch
Datafox EVO 3.5 Pure
Flexible data collection with method

Advertisement

Table of Contents
loading

Related Manuals for Datafox EVO 3.5 Pure

Summary of Contents for Datafox EVO 3.5 Pure

  • Page 1 Handbuch Datafox EVO 3.5 Pure Flexible data collection with method...
  • Page 2 Datafox GmbH. The assertion of all rights in this respect is reserved to Datafox GmbH, especially in case of the grant of a patent. The handover of this documentation does not establish a claim to the license or the use of the soft- and hardware.
  • Page 3 Datafox MasterIV, SW version xxx.pdf list as shown. The file is located on the Datafox DVD and for download on the homepage. Please also note the instructions in each chapter in the manual. The updates are available on our website under www.datafox.de download.

  • Page 4: Table Of Contents

    Installation of the Device .................... 14 5.2.3. Troubleshooting during Commissioning ..............14 5.3. Operation and display elements of the Evo 3.5 Pure ..........15 5.3.1. Composition and Operation EVO 3.5 Pure..............15 5.3.2. Display setup and bios of the EVO-Line 3.5 Pure ............16 5.3.2.1.
  • Page 5 Description of the table „Action2" ................96 5.9.7.3. 5.9.7.4. Additional Functions for Access Control ..............97 5.9.7.5. Liste Presence ......................98 5.9.8. State message off access control ................99 Handbuch Datafox EVO 3.5 Pure Seite V Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 6 5.12.3. Procedure ........................ 123 5.12.4. Process Variants...................... 124 5.12.5. Technical Data of the Fingerprint Module ..............125 5.13. Barcode Reader ..................... 126 Technical specifications EVO 2.8 /3.5 Pure Index Handbuch Datafox EVO 3.5 Pure Seite VI Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 7: For You Safty

    For you Safty Safety Information for Datafox Products The EVO 3.5 Pure must only be operated according to the instructions given in the manual. Do no insert any foreign objects into the openings and ports. The device must not be opened. All maintenance work must only be performed by authorized specialists.

  • Page 8: Introduction

    GPRS, USB etc. It fulfills all conditions for a flexible usage not only for personnel or order time re- cording but also for further scopes. This constitutes a real added value. The powerful tools Datafox- StudioIV and DLL facilitate quick and easy integration in any IT solutions. Due to scalability, numer- ous options are available.

  • Page 9: Typography Of The Documentation

    Due to technical development, illustrations, function steps, procedures and technical data may vary slightly. The Datafox device has been developed for the purpose of creating a flexible and easily inte- grated terminal for data recording serving for a great variety of applications. The device is robust and easy to use.
  • Page 10 With some practice it will be possible to create a complete compilation for the EVO 3.5 Pure within half an hour. If you need functions that are not available, please contact us. Note:  If you need support for the compilation of setups, we offer you our services. Due to...

  • Page 11: Intended Use And Environmental Protection

    In order to ensure maximum battery life, it is recommended to recharge the battery only after com- plete discharge. See respective type label of the device EVO 3.5 Pure. 3.3. Environmental Influences Extreme environmental influences may damage or destroy the device and should be avoided. This includes fire, extreme sunlight, water, extreme cold and extreme heat.

  • Page 12: Mounting Outdoors

    We recommand, if you use the devices outsite, then let it running permanently. Both in terms of temperature as well as condensation, it is recommended to not switch off devices which are used outdoors. Handbuch Datafox EVO 3.5 Pure Seite 6 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 13: Repair

    Except for the battery replacement in mobile devices , Datafox devices are maintenance-free and must only be opened by authorized professionals. In case of defects, please contact your dealer or the Datafox service hotline. If a definite defect is present, you can also send the device directly to Datafox. 3.7. Cleaning...

  • Page 14: Disposal

    The correct disposal of electrical and electronic equipment protects human life and the environment. For more information regarding the disposal of electrical and electronic equipment, please contact your local authorities or waste disposal companies. Handbuch Datafox EVO 3.5 Pure Seite 8 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 15: System Requirements / Hardware

    4.2. Requirements for Operating Datafox Devices In order to operate the Datafox device, you need a 230 V power connection for the Datafox power supply. Depending on the main communication set, you need a corresponding transfer medium or connection cable.

  • Page 16: Kompatibilität Compatibility

    Device files (*.hex) of the MasterIV devices are delivered in a common firmware file archive. It has the file extension DFZ (stands for Datafox Zip). Now simply the firmware file archives (*.dfz) are in- dicated instead of the device files (*.hex). This applies to the DatafoxStudioIV and the DLL. The in- dication of device files (*.hex) is still possible.

  • Page 17: Device Firmware And Communications Dll

    A newer version of DatafoxStudioIV does not work with an older DLL. 4.3.6. DatafoxStudioIV and Device Setup With the DatafoxStudioIV, you create a device setup (application program) for the Datafox device. That means that in the setup only those functions were defined which were available in the Data- foxStudioIV version at the time of the setup creation.

  • Page 18: Update / Downgrade

    When performing a firmware downgrade the firmware has to be transmitted to the device twice. This has technical reasons. Errors shown on the display of the device after the first transfer can be ignored. Handbuch Datafox EVO 3.5 Pure Seite 12 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 19: Device

    After establishing the power supply the device will switch on automatically. The EVO 3.5 Pure automatically starts booting, recognition of the hardware options and loading the set- up. After having finished booting, the device switches to operation. Now the EVO 3.5 Pure is ready for use.

  • Page 20: Installation Of The Device

    Access control ► Finishing installation of the device ► Setting for man communication 5.2.3. Troubleshooting during Commissioning ► Please see the FAQ on our website: http://www.datafox.de/faq-de.html. ► Tips: o Connection to the device cannot be set up via TCP/IP ...

  • Page 21: Operation And Display Elements Of The Evo 3.5 Pure

    5.3. Operation and display elements of the Evo 3.5 Pure 5.3.1. Composition and Operation EVO 3.5 Pure The terminal includes a capacitive touch. 08:45 We. 26.06.13 display and Please choose touchsector absent Check in Check in  Order balances Power-LED...

  • Page 22: Display Setup And Bios Of The Evo-Line 3.5 Pure

    Display in the left area of the tile:  = transponder input (take over value of transponder)  = check in  = check out Handbuch Datafox EVO 3.5 Pure Seite 16 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 23: Structure Display Evo 3.5 /2.8 Pure "In The Bios Menu

     signal volume  provider The respective submenus should be self-  data storage 3068kB explanatory. The respective display depends  list storage 1028kB on the hardware equipment. Handbuch Datafox EVO 3.5 Pure Seite 17 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 24 The IP assigned by the server will be displayed. 192.123.123.155 Netmask 255.255.255.000 TCP / IP - settings: IP - set 08:45 192.123.123.155  Lan parameters Gateway 192.123.123.1  Port 8000 Reporting cycle (alive)  Handbuch Datafox EVO 3.5 Pure Seite 18 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 25 - Hitag 2 -> from segment 4 - Mifare Classic -> from sector 0 block 1 Otherwise, only the type and version of the transponder reader will be displayed. Handbuch Datafox EVO 3.5 Pure Seite 19 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 26 „user settings“ -> „touch“. Test Here the correct function of the touch screen can be checked. To exit the menu, hold down on the display with two fingers for three seconds. Handbuch Datafox EVO 3.5 Pure Seite 20 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 27: Installation Of The Evo 2.8 / 3.5 Pure Terminal

    The terminal is mounted at the top. On the down site can you fixed the terminal with a screw. Befestigungslöcher Fixed screw Torx T8 Attachment for cable ties for strain relief. Handbuch Datafox EVO 3.5 Pure Seite 21 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 28: Connecting Of Evo 2.8 /3.5 Pure Terminals

    5.5. Connecting of EVO 2.8 /3.5 Pure Terminals 5.5.1. Connecting plugs The EVO 3.5 Pure have intergatet 5 modulplaces. On this places can you order different modules. You can choose the modules on the pricelist. 12VDC RS232 Steckerleiste des EVO 3.5 Pure V4...

  • Page 29: Powersupply Of The Evo 2.8 / 3.5 Pure

    IEEE 802.3af 15,4 Watt 12,95 Watt PoE+ IEEE 802.3at 25,4 Watt 21,90 Watt If power is supplied via POE, an external access-reader can also be supplied via the access control plug. Handbuch Datafox EVO 3.5 Pure Seite 23 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 30: Modules For Devices Of Hardware V4

    5.6.1. Modules for devices of hardware V4 5.6.1.1. Description of the various extension modules The Datafox devices of the generation V4 are particularly distinguished by the variable configuration of individual modules. Depending on the device, a certain number of module locations are available.
  • Page 31 You see here, in the IO-Box are Modulplaces usable. This can be indi- vidually fitted. Exceptions: Modulplace 8, only here TCP is possible. RS 485 for access control - maximum 4 Modules can be fitted. Handbuch Datafox EVO 3.5 Pure Seite 25 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 32: Read Out Important Module Information From The Device

    5.7.1.1. Read out important module information from the device Click on: "Configuration -> Device Configuration BI- OS" Then click on "Status" thereafter Click "Read". Handbuch Datafox EVO 3.5 Pure Seite 26 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 33 Status of the digital outputs: Output 1 is continuous here from left to right. Analog inputs from left to right with respective currently applied voltage. Number of stored records in the device and memory used. Handbuch Datafox EVO 3.5 Pure Seite 27 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 34: Connection Of The Individual Modules

    Analog inputs, 4 times analog IN common ground; GND / Ground + 0-10 V Signal 4 + 0-10 V Signal 3 + 0-10 V Signal 2 + 0-10 V Signal 1 Handbuch Datafox EVO 3.5 Pure Seite 28 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 35: Times Digital Out

    4 times digital IN Connectiom example (Connection of 4 contacts): e.g.: 4x digital in max. 30V 0 - 1,5 V Input logical 0 3,5 V - 30 V Input logical 1 Handbuch Datafox EVO 3.5 Pure Seite 29 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 36: Bus For Access Control

    Furthermore, the connection for a digital input and output is available. The pin assignment looks as follows: How the individual access components are connected or wired, can be found in the chapter "Access control" Handbuch Datafox EVO 3.5 Pure Seite 30 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 37: Communication Of Hardware V4 Devices

    The type of communication depends on the device. All possible communications are listet in the device.  Note: Datafox-devices are able to communicate encrypted. „DatafoxStudioIV“. Read more in the manual for the The switching of the communication can be done via : 1.

  • Page 38: Automatic Dedected Conectet Usb To Pc

    If the device is connected to a pc no other connections (for example Wi-Fi) will happen If the USB-cable is disconnected it will automatically switch to the configured main com- munication Handbuch Datafox EVO 3.5 Pure Seite 32 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 39: Installing Usb Driver For Hardware V4 Devices

    Follow the instructions on the screen: Caution: Only use the driver wich are delivered with the device! Note:  If you have DatafoxStudioIV installed the USB-driver will already be installed on your Handbuch Datafox EVO 3.5 Pure Seite 33 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 40: Comunication / Record Transfer Via Usb-Stick (Host)

    Lists of access control can be transferred individually, operation lists must always be transmitted in complete form. All lists defined in the setup must also exist on the stick in the "List" directory. Handbuch Datafox EVO 3.5 Pure Seite 34 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 41: Error Message By Using Usb-Stick (Host)

    Error by checking the handle, the file is not open Error write protect Error by the record stucture Error duren the firmware update No USB stick Incorrect password No list Handbuch Datafox EVO 3.5 Pure Seite 35 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 42: Communication Via Tcp / Ip

    The LAN / WLAN configurations are saved in a file with the filename extension "*. df0". Here you now have the possibility to edit the file, load it into the Datafox device (upload) or read it from the device (download).

  • Page 43: Communication Tcp / Ip Via Network-Cable

    For devices with display, the IP address can also be entered directly on the device. Press ESC and ENTER simultaneously to enter the Bios menu of the device. More information can be found in the chapter „bios menu“. Handbuch Datafox EVO 3.5 Pure Seite 37 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 44: Communication Tcp / Ip Via Wlan / Wifi

    When setting the encryption AES or WEP, only one type is used at a time. The setting AES+WEP means for some access points that AES encryption is performed first and then additionally encrypted with WEP. In this case, only set AES. Handbuch Datafox EVO 3.5 Pure Seite 38 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 45 WLAN connection. The user therefore has no insight into the dial-in parameters at the various locations.  Hint: With automatic selection of the configuration / location, the first attempt is always made to establish a connection with the default schema. Handbuch Datafox EVO 3.5 Pure Seite 39 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 46: Location Selection In The Bios Menu Wlan

    Recommended setting We recommend the following setting: - WPA2 - AES - Shared/PSK Datafox uses the following access points internally for testing: - Longshine LCS-WA5-45 IEEE802.11g - WatchGuard XTM WEB UI - Longshine IEEE802.11n - TP-Link WR841N v6/v7 00000000 Setting Access-Point Setting StudioIV_WLAN-Device Handbuch Datafox EVO 3.5 Pure...

  • Page 47: Connection Of The Terminals Via Tcp/Ip Dns / Dhcp

    5.8.5.5. Connection of the Terminals via TCP/IP DNS / DHCP To connect a Datafox EVO-Device with the Hostname it is necessary to set something in the DNS- Server. (In this example Windows-Server 2012) Create a new Host (A)-value: Abbreviation Descripion...
  • Page 48 DHCP- entry for Datafox devices If a device is set to DHCP, the IP address and the entry in the DHCP server can look like this. The entry contains the following: Handbuch Datafox EVO 3.5 Pure Seite 42 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 49 DHCP- entry EVO 2.5 10245 .zentrale.de Evo25-10245.zentrale.de EVO 3.5 10246 .zentrale.de Evo35-10246.zentrale.de AE-Master 10247 .zentrale.de AE-10247.zentrale.de PZE-Master 10248 .zentrale.de PZE-10248.zentrale.de EVO 4.3 10249 .zentrale.de Evo43-10249.zentrale.de Handbuch Datafox EVO 3.5 Pure Seite 43 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 50: Communication Via Rs485

    Setting for communication in the DatafoxStudioIV for connection via RS 485: Com-Port See in the device man- ager on your PC Baudrate 38400 and Busnumber are to set in the device bios menu Handbuch Datafox EVO 3.5 Pure Seite 44 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 51: Connecting The Terminal Via Rs485 With A Comserver Lantronix

    Setting for communication in the DatafoxStudioIV for connection via RS 485: IP and Port must set in the comserver. Baudrate 38400 and Busnumber are to set in the device bios menu Handbuch Datafox EVO 3.5 Pure Seite 45 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 52 Setting in the Comserver for connection via RS 485: Port: for example 8000 IP: hier als Beispiel 192.168.123.224 Handbuch Datafox EVO 3.5 Pure Seite 46 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 53: Communication Via Cellular Network (Gprs)

    The antenna is located in the connection compartment of the device and can optionally be replaced by an external antenna if reception is bad. The SIM card is inserted via the connection compartment of the EVO 3.5 Pure. Einsetzen der Sim-Karte beim Gerät Caution: For inserting the SIM card a tool in pen or screwdriver form is required.

  • Page 54: Communication State

    Device is the encryption active, but not on the server battery is down, to disable Modem. impossible connect to the provider or bzw. Roaming impossible close connection Turn modem off Handbuch Datafox EVO 3.5 Pure Seite 48 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 55: Communication Via Sms

    5.8.8. Communication via SMS 5.8.8.1. Send a SMS With the EVO 3.5 Pure, it's possible to send an SMS. Condition for this is, an integrated GPRS- Modem (communication via Cellular Network). The main communication must be set on GSM or GPRS/GSM.

  • Page 56: Receive Sms

    (default setting). Save you an empty Key, then receive the device every SMS. The last received SMS can you see in the Bios-Menu under „general information Bios (Menu)“. Handbuch Datafox EVO 3.5 Pure Seite 50 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 57 Connection to the server with the saved parameters in the „active mode“. b) and c) Connection on Port 8000 to the server (www.datafox.de/123.123.123.123). d) Connection to the server “www.datafox.de” and port “4711”. Handbuch Datafox EVO 3.5 Pure Seite 51 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 58 Control a technical system and send a SMS in trouble: Is the level of regulation from the system not correct then gives a report via SMS. The Datafox MasterIV is here not the regulator. He gives only a report in trouble. If necessary, a procedure also can be done.

  • Page 59: Connection And Wirering Of The Accesscontrol

    When adding comments, you have to notice that in a comment line no field values can be given and that the comment line has to start with a semicolon. The table Reader.txt might look like this: RefLocation RefAction PinGeneral Handbuch Datafox EVO 3.5 Pure Seite 53 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 60 Online / offline after time-out is a combination. If the serv- er is unavailable, the terminal can decide on basis of its lists whether to grant access to a person or not. Handbuch Datafox EVO 3.5 Pure Seite 54 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 61: Description Of Tables For Access Control 2

    In our example, it has number 1. If there are several PZE-MasterIVs in an ac- Number cess system, they can be depicted in one table connection and it is not neces- (int) sary to have a separate string for each PZE-MasterIV. Handbuch Datafox EVO 3.5 Pure Seite 55 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 62 Indicates the assigned time model. (0 = not used) During this time access is RefTime granted. Thus, also "‘half holidays"’ like New Year’s Eve can be realized. (Time) Table Holiday (setting blocking days like holidays or company holidays) Handbuch Datafox EVO 3.5 Pure Seite 56 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 63 (int) Table Action (list of all workable actions in the access control system; an action group, i.e. all ac- tions with the same action number, can switch several relays) Handbuch Datafox EVO 3.5 Pure Seite 57 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 64: Access Control Ii With Phg-Modules

    Mifare is supported. Here for 5 of the max. 6 keys can be used in the setup. Attention: Technical data for the PHG access modules can be found on the Datafox DVD or in our download area. Please note the power consumption of the modules and the voltage drop at long cable lengths.

  • Page 65: Connecting Of Phg-Reader

    5.9.2.1. Connecting of PHG-reader In order to connect the PHG modules, please note the PHG documentation on the Datafox CD: <Datafox-Geräte- Datafox-Zutritt-Module PHG *.pdf> In the PHG documents for the single modules, the pin assignment and configuration via the DIP switches are described.
  • Page 66 RS485 I²C max. 1000 m max. 5 m floating relay contact Reader I/O-Box Power supply 12 V DC for reader C max. 5m ISTY 2x2x0,8  / – / Handbuch Datafox EVO 3.5 Pure Seite 60 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 67 Power supply for door opener Bus Nr. 1 Siedle-access reader Wire plan for Siedle access reader: Power supply 12 V DC for reader max. 42V; 2A Power supply for door opener Handbuch Datafox EVO 3.5 Pure Seite 61 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 68 Reader potential-free contact for door RS485 I²C max. 5 Reader potential-free contact for door more reader Last reader last reader end resistor max. 1000 m switch 7 -> on Handbuch Datafox EVO 3.5 Pure Seite 62 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 69 – / ~ further reader In any case, a protection circuit should be integrated when connecting the door-opener. A fly back diode for DC and an RC element for AC. Handbuch Datafox EVO 3.5 Pure Seite 63 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 70 Relais 2 normaly open free free digital in 2 Signal digital in 2 ground 1 und 2 ground U+ 8…..30V ST 1 Circuit diagram “S“ normaly open “G“ common “Ö“ normaly close Handbuch Datafox EVO 3.5 Pure Seite 64 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 71: Configuration

    Handbuch Datafox EVO 3.5 Pure Seite 65 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 72 C bus, is omitted. Corresponding reader table: RefLocation RefAction PinGeneral Description Master device Reader at RS485 (PHG) IO-Box at I C-Bus Reader at RS485 (LTM) IO-Box at I C-Bus Handbuch Datafox EVO 3.5 Pure Seite 66 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 73: Access Control Wiht Evo-Access Modules

    -20 ° C to +70 ° C, IP65 Transponder systems 125kHz Mifare Legic Hitag 1+2+S Mifare Classic Legic prime Unique EM4102 Mifare Desfire Legic advant Titan EM4450 Mifare Ultralight Handbuch Datafox EVO 3.5 Pure Seite 67 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 74 3, without terminate resistor 0-0-0-1-1 Connector for IO- modul Relay + digital in description Number. +10V bis +30V DC ! neu RS 485-Data „B“ DIP-switch RS 485-Data „A“ GND ground Handbuch Datafox EVO 3.5 Pure Seite 68 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 75: Connecting Of The Evo-Access Reader Examples

    5.9.3.1. Connecting of the EVO-access reader examples Cable plan for one door, 1 Relay in the EVO 3.5 Pure: Bus Nr. 1 RS 485 ZK Bus-ID 1 TCP / IP (LAN) 12V vom Master Türöffner Relais 1 der ZK-Box Bus Nr. 1...

  • Page 76: Access Control Ii With Evo-Zk-Plus-Reader

    RGB colours. The control of the LED is con- trolled exclusively by the readers firmware. access denied = red - access permitted = green - Bios activated = blue - Handbuch Datafox EVO 3.5 Pure Seite 70 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 77: Display For State Of Acces Control

    Errormessage error communication The reader is in constant communi- cation with the master. If communication is interrupted, this is indicated by the text "Communi- cation error" on the reader. Handbuch Datafox EVO 3.5 Pure Seite 71 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 78: Bios-Menu

    The following information can be called up in the general con- figuration: - Installed firmware, serial number - Memory allocation for the image memory - Transponder test for the transponder configured in the mas- ter setup. Handbuch Datafox EVO 3.5 Pure Seite 72 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 79: Display Configuration

    The bus terminating resistor of 120 Ω is switched on or off in the bus configuration under "Terminating resistor". Note: If it is the last or only reader in the RS485 bus, the termi- nating resistor must be switched on. Handbuch Datafox EVO 3.5 Pure Seite 73 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 80: Connection Of The Evo-Access Reader Plus

    This extension should not be used in unsecured area. Transponder systems 125kHz Mifare Legic Hitag 1+2+S Mifare Classic Legic prime Unique EM4102 Mifare Desfire Legic advant Titan EM4450 Mifare Ultralight Handbuch Datafox EVO 3.5 Pure Seite 74 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 81 Cable plan for 1 Door, 1 Relayin the EVO 3.5 Pure: Bus Nr. 1 10-30V DC TCP / IP (LAN) RS 485 ZK Bus-ID 1 Door opener relay on the master device Reader Table, for this example: ZM / Bus-ID...
  • Page 82 Cable plan for 3 doors, 3 Relays in the EVO 3.5 Pure: supply Bus Nr. 1 12 – 30V DC per reader 500mA RS 485 ZK TCP / IP (LAN) max.2,5 m branch box Door opener relay 1 Bus Nr. 2 Supply for door opener max.
  • Page 83 Wire plan for 3 doors, 3 Relays in the EVO 3.5 Pure: supply 12 – 30 V Bus Nr. 1 - supply for door opener max. 2,5m Bus Nr. 2 max. 2,5m Bus Nr. 3 max. 2,5m more reader possible Handbuch Datafox EVO 3.5 Pure...

  • Page 84: Access Control With Ts-Readers

     Note: The single modules are connected to a bus. DIP switch 5 sets whether the modules are to communicate via RS232 or RS485. Handbuch Datafox EVO 3.5 Pure Seite 78 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 85: Installation Variants

    A Door without a Separate Reader The EVO 3.5 Pure is access scanner, access master and door-opener at the same time. This solu- tion should only be used in protected areas so that the door opening relay cannot be manipulated.
  • Page 86 A Door with a Separate Reader The EVO 3.5 Pure is installed in a protected area inside a building and the reader is installed out- side. The terminal is access master and door-opener at the same time. The door opening relay is in the PZEMasterIV and thus installed in the protected area.
  • Page 87 RS232 connection max. 15 m Relay for door Door control Wire plan: Reader (L) Art-Nr.:106020 Door control max. 30V 2A door opener Reader (L) Art-Nr.:106020 Door control max. 30V 2A door opener Handbuch Datafox EVO 3.5 Pure Seite 81 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 88 30V 2A Door opener Reader and door modul (LTM) Art-Nr.:106030 Button, for door opening from inside Door – contact Door monitoring ext. max. 30V 2A Door opener Handbuch Datafox EVO 3.5 Pure Seite 82 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 89 Reader and relay on RS485 (LTM) Reader on RS232 (L) Reader and relay on RS485 (LTM) Reader on RS232 (L) Reader and relay on RS485 (LTM) Reader on RS232 (L) Handbuch Datafox EVO 3.5 Pure Seite 83 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 90 At closed door contact ca. 15 mA are used up at 12 V = 0.18 Watt. This means a con- sumption of ca. 1.6 kWh per year. Handbuch Datafox EVO 3.5 Pure Seite 84 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 91: Connecting The Ts-Series Access Reader

    DIP switch 1 in position "ON" and switches 2 - 5 in position "‘OFF"’ stand for bus number "1". DIP switches 1 and 2 in position "ON" and switches 3 - 5 in position "OFF" stand for bus no. "3". Handbuch Datafox EVO 3.5 Pure Seite 85...
  • Page 92 Combination module (LTM) Art-Nr.: 106030 Tür Kontakt ext. max 30V 2A Door opener Reader module (L) Art-Nr.:106020 More modules are possible. Tür Kontakt ext. max 30V 2A Door opener Handbuch Datafox EVO 3.5 Pure Seite 86 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 93 Termination for RS485 bus (0= termination off, 1= termination on) 120Ω Example bus address register: Address Bit 0 Bit 1 Bit 2 Bit 3 Bit 4 DIP switch folder. Handbuch Datafox EVO 3.5 Pure Seite 87 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 94: Online Funktions For The Access Control

    With the anser from the server you are able to perform specific actions with the access readers The following examples will give you an insight in what is possible with the functions and actions. All parameters correspond the online functions with the dll. Handbuch Datafox EVO 3.5 Pure Seite 88 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 95 For this, the new keywords "module" and "master" were implemented. These must be used togeth- er, replacing the keyword "access". Attention: The order “access->mask->typ->duration” or master->module->mask->typ- >duration must be strictly adhered to. status=ok&checksum=2482&access=010&mask=5&type=1&duration=2 status=ok&checksum=2482&master=1&module=010&mask=5&type=1&duration=2 Handbuch Datafox EVO 3.5 Pure Seite 89 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 96 You can also perform multiple actions on the access control in one response. However, the total length of the response must not exceed 254 characters. Attention: A automated switch between online and offline mode is not possible in http mode Handbuch Datafox EVO 3.5 Pure Seite 90 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 97: Online Via Dll Connection

    LEDs. More dll functions are documented in the “Datafox SDK” on our website http://www.datafox.de/software- de.html?file=tl_files/Datafox_Devices/Downloads_Geraete_Zubehoer/MasterIV-...

  • Page 98: Function Extention For Access Control Ii

    All readings of RFID on this reader make all actions in the table “action“, with the ID 3000. Tabelle Time Weekdays TimeStart TimeEnd Description text 1234567 00:01 23:59 24houers opening possible 1234567 07:00 16:00 Time for special action Handbuch Datafox EVO 3.5 Pure Seite 92 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 99 Description 1111 2005-01-01 2015-12-31 Master of Garage 2222 2005-01-01 2015-12-31 Skilled workers 3333 2005-01-01 2015-12-31 Facility manager Facility manager second RFID-chip, 4444 2005-01-01 2015-12-31 only for closing the door Handbuch Datafox EVO 3.5 Pure Seite 93 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 100 The goal is to allow users only to exit at the allowed floor. Then tenant usees the transponder to activate only the switch for his floor. In the cabin of the elevator the RFID-reader is installed. The Datafox-Device is on the top of the cabin.
  • Page 101 2099-12-31 floor Tenant of an apartment on the 1102 2005-01-01 2099-12-31 floor 1 and 2 Tenant of an apartment on the 1104 2005-01-01 2099-12-31 floor 1, 2 and 3 Handbuch Datafox EVO 3.5 Pure Seite 95 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 102: Description Of The Table „Action2

    Would you like to continue working with the "action" table, the table "Action 2" may not be transferred to the device. A table "Action 2" has already been transferred to the device, it must be cleared by load- ing a new setup. Handbuch Datafox EVO 3.5 Pure Seite 96 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 103: Additional Functions For Access Control

    Here you can choose whether the reject is limited in time or whether Hard remains active. In the case of Hard Active, access is not permitted again until another room ID has been accessed. This corresponds to leaving the previous room. Handbuch Datafox EVO 3.5 Pure Seite 97 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 104: Liste Presence

    Reference to the ID of the room, defined in the table "Location", where this per- RefLocation (int) son currently stays Number Time stamp when the person entered the current room TimeStamp (int) Integer in seconds, starting 01.01.2000. Handbuch Datafox EVO 3.5 Pure Seite 98 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 105: State Message Off Access Control

    6 is low (Off). 56 # digital output 6 is HIGH.(On). 57 # digital output 6 is for the time ELAPSE, HIGH. for new devices hardware version 4 Handbuch Datafox EVO 3.5 Pure Seite 99 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 106 12 isLow 171# digital input 12 is HIGH _____ ____continuously until: 210# digital input 32 is Low 211# digital input 32 is HIGH for new devices hardware version 4 Handbuch Datafox EVO 3.5 Pure Seite 100 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 107 2 alarm-input 3 alarm-input 4 alarm-input 1 alarm-input 6 220# alarm-input 7 221# alarm-input 8 _______ _____ continuously until: 245# alarm-input 32 for new devices hardware version 4 Handbuch Datafox EVO 3.5 Pure Seite 101 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 108 State message off access control in a record: Note: Do you want see the status from accses control, to coose this settigs in the Setup.  Handbuch Datafox EVO 3.5 Pure Seite 102 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 109: Funkcionfor Access Control U&Z (Locking Cylinders)

    The electronic locking systems read an RFID chip / card and transmit the read information to Data- fox access control. The Datafox access control then decides on the basis of the access logic wheth- er the door is opened or not.
  • Page 110 12- 20 V + / 0 V - / ~ function B – RS 485 A – RS 485 operating voltage 0 V + / ~ 12- 20 V - / ~ Handbuch Datafox EVO 3.5 Pure Seite 104 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 111: First Start With Locking Cylinders

    2nd) The knob module is mounted in the cylinder housing by inserting and simultaneously rotating it.(A+B) 3) To reset the disassembly mode, hold the disassembly card or an authorised transponder in front of the knob module.(C) Handbuch Datafox EVO 3.5 Pure Seite 105 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 112: Set Up The Wireless Network For Cylinder

    Teach out: The cylinder is removed from the FSM and can be taught in to another FSM.  Teach-in: To connect a radio lock cylinder to the FSM (the radio lock cylinder then only communicates with this FSM) Handbuch Datafox EVO 3.5 Pure Seite 106 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 113: Battery State And Live Time

    Battery status of the radio lock cylinders in phase 2 Battery status of the radio lock cylinders in phase 3 (empty) Radio lock cylinder set to battery change mode Handbuch Datafox EVO 3.5 Pure Seite 107 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 114: Change The Access Control Master Id And Nob Active Time

    FSM is established and the connection remains active as long as the Knob Active Time is active. Useful values are between 2 and 10 seconds. By default, this time is set to 3 seconds. Handbuch Datafox EVO 3.5 Pure Seite 108 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 115: Optical And Acoustic Signals Of The U&Z Locking Cylinder

    (out of range) short  short  = = red flashing red lights up  = = green flashing green lights up = long low tone = short beep Handbuch Datafox EVO 3.5 Pure Seite 109 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 116: Supported Transponder Technologies

    - read UID - Read file (max. 220Byte) Not supported is - Random UID (Read true UID at Random UID badges) Legic Prime and Legic Advant currently no restrictions are known. Handbuch Datafox EVO 3.5 Pure Seite 110 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 117: Rfid Reader

    5.10. RFID Reader The RFID reader is built-in the EVO 3.5 Pure If this option is available, see the type label and the label on the backside. By DatafoxStudioIV you can enable the RFID reader. For more information see the manual of DatafoxStudioIV.

  • Page 118: Data On Card

    6987986 Franz Zufall The terminal stores where the data is written to the ID card (e.g. segment) Doors with electronic locking cylinder or similar. Current authorization yes / no Handbuch Datafox EVO 3.5 Pure Seite 112 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 119: Settings For Using Dataoncard

    When importing via the DLL, the data needs to be passed on as binary data. Using the DFC GetField, DFC GetField list functions, you are working with strings, while the firm- ware converts the hexstrings to and from the binary data. Handbuch Datafox EVO 3.5 Pure Seite 113 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 120 1. ) RFID Configurations for the RFID reader The transponder configuration for the reading can be freely selected. However, firstly it needs to be defined in the basic transponder settings. Handbuch Datafox EVO 3.5 Pure Seite 114 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 121  Please note: First, complete the transponder configuration, then create the list with the binary field and finally parameterize the field function Data on Card. Handbuch Datafox EVO 3.5 Pure Seite 115 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 122 0x30, 0x31, 0x32, 0x33, 0x34 ……  Please note: When a 3-tone sequence is signaled, the Data-On-Card option is not available on this de- vice. The option has to be purchased afterwards. Handbuch Datafox EVO 3.5 Pure Seite 116 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 123: Dataoncard On The Access Control Reader

    Only one access control reader (ZK) can be connected to the bus at any time. Dip switch 1 and the termination of the bus must be set to "ON" (Bus address 1). Handbuch Datafox EVO 3.5 Pure Seite 117 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 124: Dataoncard An A Aceess Control Reader - Wirering

    ZK-Knoten Wireringplan for EVO-access reader with using DataOnCard: EVO-access-reader connector ZK-Knoten Wireringplan for PHG-access reader with using DataOnCard: RS 485 bus line up to 500m in a twisted pair cable Handbuch Datafox EVO 3.5 Pure Seite 118 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 125: Operation Finger Scanner

    In no case may be components on the finger, which have an abrasive effect. These use the protective layer of the line sensor and thus significantly reduce the service life. Handbuch Datafox EVO 3.5 Pure Seite 119 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 126: General Infomation

    61.00, the image quality must necessarily be less than 70. The recommended value of 40 offers an optimum for learning the fingers.  Note: Recoment settings: Security level 60%, quality: 40% minimum of minutien: Handbuch Datafox EVO 3.5 Pure Seite 120 Datum: 06.08.2018 Version: 04.03.07.XX...
  • Page 127 The behavior must be checked in each individual case, since it is very dependent on the group of people. In such cases, one should switch to another finger, because not every human finger is suitable for the Minutien method. Handbuch Datafox EVO 3.5 Pure Seite 121 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 128: Teach-In

    05597861113494 M. Musterfrau Step 2 Scan finger Step 3 PID and finger characteristics to combinate finger characteristics Template Step 4 Save Template on Biokey-Module on Mifare Transponder on Server Handbuch Datafox EVO 3.5 Pure Seite 122 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 129: Procedure

    (scanned) finger. The fingerprint module transfers PID and validity to the terminal. The task in the terminal for the fingerprint triggers an input sequence and access control - if defined in the setup. Handbuch Datafox EVO 3.5 Pure Seite 123 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 130: Process Variants

    2.) Delete template from fingerprint module or 1.) Determine PID (read from ID card or via list selection) 2.) Delete template from fingerprint module Deleting a template from a fingerprint module by verification Handbuch Datafox EVO 3.5 Pure Seite 124 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 131: Technical Data Of The Fingerprint Module

    Experience shows that not for all employees the fingers can be recorded in sufficient quality. o Depends on the state of the fingers. For those persons the ID card or PIN has to be recorded. Handbuch Datafox EVO 3.5 Pure Seite 125...

  • Page 132: Barcode Reader

    5.13. Barcode Reader You can connect any barcode reader with a RS232 port to the EVO 3.5 Pure. Observe the following pin assignment of the RS232 interface. 12VDC RS232 Function Description Modulplace RS 232 Here an Mini-DIN M004 example on...
  • Page 133 Cable attachment of the barcode reader: Place the cable of the bar- code reader in the wall bracket approximately in this way or fix the cable with a cable tie. Handbuch Datafox EVO 3.5 Pure Seite 127 Datum: 06.08.2018 Version: 04.03.07.XX...

  • Page 134: Technical Specifications Evo 2.8 /3.5 Pure

    Protection IP 54 Software Configuration program Setup program (Datafox-Studio) to configure without programming effort Communication tools http, DLL or C source code for inclusion in the application Module extensions For the extension to a variety of functions such as communication, inputs/outputs, sensors are 5 expansion slots for...

  • Page 135: Index

    Intended Use and Environmental Protection 5 Interlocking function 79 introduction 2 Kommunikation 31 Umschalten 31 Lautstärke 17 Mobilfunk Verbindung Status 48 power supply 23 POE 23 SMS 49 System Requirements / Hardware 9 Handbuch Datafox EVO 3.5 Pure Seite 129 Datum: 06.08.2018 Version: 04.03.07.XX...

Table of Contents