Table of Contents
Advertisement
Manual Datafox ZK-MasterIV
Example: Controlling the door-opener only via the ZK-II You can control the door-opener directly via
the access control-II (ZK-II). Please note that the door-opener has to work in a voltage range from 8 to
12 V DC and must not exceed a power consumption of 100 mA.
Figure 49: Controlling the door-opener via ZK-II
Example: Controlling the door-opener via the ZK-II and a push-button It is possible to additionally
connect a push-button for controlling the door-opener.
Figure 50: Controlling the door-opener via the ZK-II and push-button
Page 70
Version: 04.01.07.00
www.datafox.de
Advertisement
Table of Contents
