Datafox ZK-MasterIV Manual page 129

Manual Datafox ZK-MasterIV
Figure 110: HitagS H48
Titan
Titan (EM4450) is organized in 34 segments. Each segment has a length of 64 bits. You can find the
serial number in segment 32.
Figure 111: Titan EM4450 transponder
For the writing of the cards an initial value per each segment can be set. You can activate the option
Autoincrement value behind the current initial value. Then the current segment value is increased by the
value indicated under Autoincrement value after every write operation. The initial values of the segments
can be edited in the device-BIOS. The set autoincrement value is only displayed in the device-BIOS and
cannot be changed on the device itself. The writing of cards can be saved by a menu password.
Version: 04.01.07.00
The H48 means, that this transponder has 64 regis-
ters for a 32bit-value each, altogether 2048 bit (see
Hitag1).
At most 3 segments are available for concurrent
processing. You can select them in the DatafoxS-
tudioIV under Transponder via the segment
number.
With the filing format you set, how the 64bit-value
is used.
When you select Fixed length, the read card value
is cut to the set number of digits and is filled up
with zeros (0) left-sided, if necessary.
Page 129
www.datafox.de