Connection - Datafox ZK-MasterIV Manual

Manual Datafox ZK-MasterIV

3.8.1 Connection

In order to connect the PHG modules please note the PHG documentation on the Datafox CD:
.. D atafox-Geräte D atafox-Zutritt-Module P HG *.pdf
   
In the PHG documents for the single modules the pin assignment and configuration via the DIP switches
are described. In order to carry out an access control with the ZK-MasterIV the option "'access"' has
to be integrated (Datafox Art. no. 105201). The following figure shows the possible connections o PHG
devices to a ZK-MasterIV for an access control.
Figure 61: Connection of the access control II
The bus number of the module is set via the DIP switches 1 - 4. The DIP switch 5 always has to be at
"'ON"'. The DIP switches 6 and 8 always have to be at "'OFF"'. With the DIP switch 7 = "'ON"' the
RS485 bus is terminated at the last module, otherwise always "'OFF"'.
If additionally a door-opener is to be controlled via a relay, the IO-box has to be used. With the IO-box
two digital exits as relays are available.
Page 89
Version: 04.01.07.00 www.datafox.de