Table of Contents
Advertisement
Manual Datafox ZK-MasterIV
Figure 38: Active connection configuration
Figure 39: Setting the communication via the ZK-MasterIV
Version: 04.01.07.00
The parameters can be changed via the
dialogue active connection configuration
in the communication menu and be trans-
mitted to the ZK-MasterIV. You may
find information about the single param-
eters in the table 6.
Grafik muss noch angepasst werden
The configuration of a ZK-MasterIV via
the DatafoxStudioIV with an active con-
nection requires an active communication
port (selected port: see figure on the left)
from the device to the DLL. Set the alive
ping, the communication timeout and the
port according to your demands on the
configuration. Afterwards all functions
of the DatafoxStudioIV can be used in
order to configure the device.
Page 50
www.datafox.de
Advertisement
Table of Contents
