Repeater Software Upgrade - Dekolink Deko3108S Product Manual

P M
RODUCT ANUAL
6.3 R S
EPEATER
NOTE: During the upgrade, the Repeater is disconnected from the network.
D
O NOT TURN OFF THE
Use the Repeater Software Update screen to view the current software version and to
update the Repeater software.
To perform the software upgrade procedure
1. From the Tree Pane, select the Repeater and click the SW Upgrade button. The
following window appears.
2. In Choose File... click Browse to browse for the upgrade file and click Open.
3. Click Upload File(s). The updating process begins. A message appears in "The
activity log" box during the upload activity.
4. Once the updating process ends successfully, a message is issued in "The activity
log" box. The next process – Getting the version number – is displayed.
5. Once the software version is ready to be installed (see message in "The activity log"
box), click Burn to continue. The installation process starts, and is run
automatically.
6. Wait until the update is complete (about 10 minutes). If the link is established
through the modem, the speed of the connection determines how long the process
takes.
Once the installation process ends successfully, a message is issued in "The activity
log" box.
Page 50
C R
OMPACT EPEATER
U
OFTWARE PGRADE
R
EPEATER DURING THE
Proprietary Data
D 3108S
EKO
C
AUTION
U
PLOAD PROCESS
D W L .
EKOLINK IRELESS TD
!!!
P/N 300XC10031 Rev. B