Required Tools And Materials; Mounting The Deko3108S - Dekolink Deko3108S Product Manual

P M
RODUCT ANUAL
• Packaging box
• Power supply 12V/4A – for external modem
• AC supply cable – for external modem
3.3 R T
EQUIRED OOLS AND
The following is required in order to mount the Deko3108S Repeater:
• Mounting Fixture (supplied)
• Four 5/16" NF hexagon screws (supplied)
•
Standard professional tools
• Anchor hexagon head screws (for concrete and plywood and gypsum drywall
installations) and anchor bolts (for brick wall installation). See 3.4.2.1.
3.4 M
OUNTING THE
3.4.1 Pre-Mounting Procedure
NOTE: The weight of the unit requires that two people mount the unit on the wall.
1. Choose the location of the Repeater on the wall according to the following criteria:
• The location should be at normal eye level height, above ground.
• Make sure to allow the door to swing completely open, and to enable easy
access to the Repeater for maintenance and on-site inspection.
2. Place the Mounting Fixture against the wall and mark the holes to be drilled – See
section 3.4.2.1 - Components for number of anchors/bolts required for each type of
wall (concrete, brick, plywood and drywall).
Page 16
C R
OMPACT EPEATER
M
ATERIALS
D 3108S
EKO
Figure 3-1. Mounting Fixture
Proprietary Data
D 3108S D
EKO EKOLINK
W L .
IRELESS TD
P/N 300XC10031 Rev. B