Repeater Management System (Rms) - Dekolink Deko2119 Product Manual

D W
EKOLINK IRELESS
7.3 R M
EPEATER
7.3.1 General
The Repeater Management System (RMS) software enables defining the
operational parameters values for the Deko2119 Mini-Repeater.
The RMS software is supplied with the Mini-Repeater. It provides full access
to all control settings and monitoring capabilities. The RMS software should be
installed and run on a host computer. The RMS software can be installed on
Windows 9x/2000/XP operating systems.
The RMS allows a local connection for control of the Repeater. .
7.3.2 Software Installation
The RMS software is supplied with the Mini-Repeater Deko2119 on a CD.
To install the RMS Software, perform as follows:
1. Insert the CD in your PC CD driver
2. Select with Windows Explorer the following file in the CD:
"RMS650_Setup_ddmmyy.exe" (where ddmmyy are day-month-year of
the software version)
3. Double click on the file to run the program
4. The Install screen is displayed (see Figure 10)
5. Do NOT change the destination folder in the screen (see Figure 10)
6. Press the Install button
Figure 10: RMS Software – Install Command Screen
Pub. 313-2006 Rev. 2.01S
L . M -R
TD INI
S
ANAGEMENT YSTEM
D 2119
EPEATER EKO
(RMS)
Proprietary Data
P M
RODUCT ANUAL
Page 21