Dekolink Deko3108S Product Manual page 20

P M
RODUCT ANUAL
3.4.2 Bracket Installation Procedure
The bracket mounting procedure differs according to the type of wall.
3.4.2.1 Components
Use the components according to the following table:
Type of wall
Concrete
Brick
Plywood and
Gypsum Drywall
3.4.2.2 Bracket Installation for Concrete, Brick and Plywood Walls
1. Using the diameter metric bit recommended by the manufacturer (anchor or bolt),
drill the required number of holes according to wall type (see 3.4.2.1) to minimum
required hole depth.
2. Remove drilling debris with a blowout bulb or with compressed air.
Note: Screws and anchors are not supplied with the Repeater.
Page 18
C R D
OMPACT EPEATER EKO
Components
Anchor Hexagon Head Screws – Install at least 4 Zinc Plated
Steel Anchor Hexagon Head Screw with Integrated Washer, such
as FBN 8/50 Fischer Fixing Systems or compatible from other
companies. See 3.4.2.2.
Anchor Bolts – Install at least 6 Zinc Plated Steel Anchor Bolt
With Integrated Washer, such as FUR 8x80 Fischer Fixing
Systems or compatible from other companies. See 3.4.2.2.
Anchor Hexagon Head Screws – Install at least 8 Zinc Plated
Steel Anchor Hexagon Head with Integrated Washer, such as
HDD-S M8x66 HILTI or compatible from other companies.
For Plywood walls – see 3.4.2.2.
For Gypsum Walls – see 3.4.2.3
Proprietary Data
3108S D
EKOLINK
W L .
IRELESS TD
P/N 300XC10031 Rev. B