Remote Wireless Management Connections - Dekolink Deko3108S Product Manual

P M
RODUCT ANUAL
4.9 R W
EMOTE IRELESS
NOTE: This section is relevant only if an external modem is to be connected.
To set up a Remote Wireless mode connection:
• Disconnect the (previously connected) Ethernet cross-cable from the computer
Ethernet port and connect it to the external modem Ethernet port.
• Connect the power cable between the external modem Power connector and the
Deko3108S AUX POWER 12V 4A MAX.
Note: The 3108S unit is powered by an AC power source while the modem is powered
by 12 VDC 4 A power source.
Page 36
C R D
OMPACT EPEATER EKO
M C
ANAGEMENT
Figure 4-2. Remote Wireless Connections
Proprietary Data
3108S D
EKOLINK
ONNECTIONS
W L .
IRELESS TD
P/N 300XC10031 Rev. B