Introduction; Features - Dekolink Deko3108S Product Manual

D W L .
EKOLINK IRELESS TD

1 INTRODUCTION

Deko3108S is a band selective midi-repeater that supports the iDEN 800 MHz band. The
repeater is specifically designed for the operation of ESMR 800 MHz and is band
selectable in the 800 MHz range [18 MHz or 7 MHz bandwidth].
Deko3108S has switchable and tunable IF-SAW filters. These enable highly accurate
out-of-band-rejection and provide simple, fast procedures for adjusting the pass band
according to the 800 MHz rebanding requirements.
Deko3108S includes the SmartALC power control algorithm that automatically optimizes
the gain setting by learning the actual range of RSSI levels over a user-specified period
of time. The SmartALC algorithm prevents oscillations, reduces the amount of isolation
required by the system and optimizes the system to minimize noise rise at the donor cell
site.
Intuitive Web access monitoring and management GUI is accessible via a local Ethernet
connection (using a cross-cable). An option for remote wireless communication
connection (via a separately purchased modem) is also available.
1.1 F
EATURES
• 800 MHz iDEN band
• Band selectable filter switch - 18 MHz or 7 MHz bandwidth
• Supports SMR technologies
• 80 dB RF gain
• 24 dBm Uplink composite power
•
34 dBm Downlink composite power
• High linear amplification
• High spectral purity
• Highly accurate frequency selection
• Excellent out-of-band interference prevention
•
IF-SAW filtering – tunable, sharp out-of-band rejection
P/N 300XC10031 Rev. B
D 3108S M R
EKO IDI EPEATER
Figure 1-1: Deko3108S iDEN Midi-Repeater
Proprietary Data
P M
RODUCT ANUAL
Page 7