Setting Date And Time; Reset The Repeater - Dekolink Deko3108S Product Manual

D W L .
EKOLINK IRELESS TD
4.7 S D
ETTING ATE AND
It is important to set the correct date and time on the unit since this provides the
timestamp for each logged event and alarm.
To set the Repeaters date and time
1. Click on CMU in the tree pane.
2. Click on Date & Time in the menu bar. The following dialog appears.
3. Set the date and time parameters and click on Set.
4. Reset the Repeater (as described in the following section).
4.8 R R
ESET THE
To reset the Repeater
1. In the Menu bar, click CMU Reset.
2. Respond to the authorization message by clicking Reset.
P/N 300XC10031 Rev. B
D 3108S M
EKO
T
IME
EPEATER
Proprietary Data
R
IDI EPEATER
P M
RODUCT ANUAL
Page 35