Viewing Alarms - Dekolink Deko3108S Product Manual

P M
RODUCT ANUAL
•
See following figure.
Not relevant -
5. Click Send.
Response in Pane
• The DL and UL frequency ranges and the Channel will be displayed according to
the selection.
If the input is invalid or out of range the following warning message will be displayed at
the bottom of the window:
4.5 V
IEWING ALARMS
After the required coverage is attained for the location, verify that no Alarms are
generated before connecting to the main control center.
To do so:
1. Click the Alarms tab. The following pane appears (alarms are described in 5.3).
Page 32
C R
OMPACT EPEATER
UL Freq. range: 806.25 MHZ – 824.0 MHz.
disabled
Status: Error, selected frequency exceed band limit
Proprietary Data
D 3108S D
EKO EKOLINK
W L .
IRELESS TD
.
P/N 300XC10031 Rev. B