Configuring The Parameters For An External Modem - Dekolink Deko3108S Product Manual

P M
RODUCT ANUAL
4.6 C
ONFIGURING THE
NOTE: This section is relevant only if an external modem is to be connected.
1. Click CMU in the left tree pane.
2. The Deko-CMU Configuration pane appears.
3. Verify that the Communication parameter in the Modem area is set to Fixed IP.
4. Define the following SNMP Trap Configuration parameters:
• Cascade Code
• Site Latitude
• Site longitude
5. Click Send.
Page 34
C R D
OMPACT EPEATER EKO
P
ARAMETERS FOR AN
Proprietary Data
3108S D
EKOLINK
E M
XTERNAL ODEM
W L .
IRELESS TD
P/N 300XC10031 Rev. B