Deko3108S Interfaces - Dekolink Deko3108S Product Manual

P M
RODUCT ANUAL
1.4 D 3108S I
EKO
Deko3108S is housed in an enclosure with a securely locked door for easy access to the
internal components for connections, adjustment and for service and maintenance.
Most of the required interfaces are located externally; however, the
ports
and the manual RF power selector (for service personnel) are located internally
and are accessed by
1.4.1 Ports
The antenna and power connections are located on the underside of the Repeater as
illustrated below.
Curtained slot –
Ethernet port
Service
antenna
connections
The following table provides a description of the front panel ports and connections.
Group
BASE
MOBILE
100 to 240 VAC
AUX PWR
ETHERNET/EXT/
Page 10
C R
OMPACT EPEATER
NTERFACES
opening
the Repeater door.
Power to
external modem
Figure 1-2. Deko3108S Front Panel
Connectors
Donor antenna connections. See 3.7.2.
Service antenna connections. See 3.7.2.
Connection to AC power supply
12VDC output power for powering external modem. See 4.9.
A Curtained slot protecting the Ethernet cable through which the
Ethernet cable is to the CMU module (see 1.4.2.1). It is required to
open the cover in order to connect to the ports.
Proprietary Data
D 3108S D
EKO EKOLINK
WARNING: Do not unscrew
while power is connected
W L .
IRELESS TD
communication
Donor
antenna
connections
Power
connection
100-240 VAC
P/N 300XC10031 Rev. B