Equipment Specifications; 07_Training Space; Assembly; 07_Tools And Material Required - Keiser M7i Installation And Operation Manual

M7i WHEELCHAIR-ACCESSIBLE TOTAL BODY TRAINER

EQUIPMENT SPECIFICATIONS

M7i Wheelchair-accessible Total Body Trainer
Height Depth
44 in 38.5 in
(1,118 mm) (978 mm)
User height requirement: 48 in (1,219 mm) or taller
Arm reach minimum requirement: 12 in (305 mm)
TRAINING SPACE
The minimum amount of required free space around
the M7i is 36 inches (914 mm), see Figure 1. When M7i
machines are positioned adjacent to each other, the
free space may be shared. Free space at the rear of
the M7i is not required when the M7i is positioned
against a wall.

ASSEMBLY

TWO-PERSON PROCEDURE: Due to the size and weight of the equipment, help is required to safely and successfully
complete installation.
TOOLS AND MATERIAL REQUIRED
Safety Blade
UNPACKING
Position the shipping box in a cleared area. Follow unpacking steps 1–3 below.
1
To position the M7i at the desired location, carefully tilt the M7i toward the rear until the transport wheels make contact with
the floor to transport.
NOTE: Carefully remove all parts from the box and check for any damage or missing parts (see "Parts List," page 8). If parts are
damaged or missing, contact your local dealer, distributor, or Keiser Customer Support by telephone at 1 559 256 8000.
Width Weight
28 in 142 lbs
(711 mm) (65 kg)
Scissors
2
FREE AREA
36 in (914 mm)
28 in (711 mm)
Figure 1. Training Area
5 mm Allen Wrench
3
07
TRAINING AREA
REAR
36 in (914 mm)
FRONT
Dry Soft Cloth
or Towel