Equipment Specifications; 06_Training Space - Keiser INFINITY 3010XP Operation Manual

OPERATION MANUAL
PERFORMANCE TRAINER

EQUIPMENT SPECIFICATIONS

Height: 87 inches (2,210 mm)
from floor at suggested installation height
Length: 12 inches (305 mm)
Width: 24 inches (610 mm)
Weight: 120 lbs (54 kg)
Resistance Range: 0 to 75 lbs (0 to 34 kg)
Cable Length: 96 inches (2,438 mm)
from start to full extension, without Cable Accessory
TRAINING SPACE
Refer to Figure 2 for the Training Space required.
Plan Training Space accordingly to allow for full-
range operation. When Performance Trainers are
mounted adjacent to each other, the Training Space
may be shared. Actual Cable Length may vary, based
on Accessory type, user height, and the position of
the Vertical Adjustment.
To safely and effectively use your Training Space, remember to:
1. Clear your Training Space: Ensure there is enough space for safe access and operation of the equipment.
2. Mark your Cable Max Limit: Secure your Cable Accessory to the Cable. Walk your Cable Accessory out until the stop is
reached. This is your Cable Max Limit. Place a marker on the floor (i.e. tape, keys, or a water bottle) to indicate your Cable
Max Limit (see Figure 3).
Cable Max Limit
Marker
WARNING: AVOID SERIOUS INJURY OR PROPERTY DAMAGE. Do not attempt to extend the Cable beyond the Cable
Max Limit. Failure to follow this warning will cause the Cable to hit a hard stop, creating a sudden dynamic load that may
result in serious injury or equipment and property damage.
Figure 2. Performance Trainer Training Space
Cable Length: 96 inches (2,438 mm)
Cable Accessory
Figure 3. Cable Max Limit Illustration
s
8 7 i n c h e
m )
( 2 , 2 1 0 m
24 inches
12 inches
(610 mm)
(305 mm)
Cable
06